--Welcome Tibtronix

TEL: 0086-755-23316583

E-mail: sales@tibtronix.com

特比通光电有限公司
Situation: » Products » 40G QSFP

40G QSFP

Product Details

40Gb/s QSFP+ Transceiver SR4 100m 850nm


Features:

       4 independent full-duplex channels

       Up to 11.2Gbps per channel bandwidth

       Aggregate bandwidth of > 40Gbps

       MTP/MPO optical connector

       QSFP MSA compliant

       Digital diagnostic capabilities

       Capable of over 100m transmission on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF

       CML compatible electrical I/O

       Single +3.3V power supply operating

       TX input and RX output CDR retiming

       Built-in digital diagnostic functions

       Temperature range 0°C to 70°C

       RoHS Compliant Part

 

 Applications:

2  Rack to rack

2  Data centers

2  Metro networks

2  Switches and Routers

2  Infiniband 4x SDR, DDR, QDR

 

Description:

The TQPM01D is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module that provides increased port density and total system cost savings. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate bandwidth of 40Gbps 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF.

An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into the QSFP module receptacle. The orientation of the ribbon cable is “keyed” and guide pins are present inside the modules receptacle to ensure proper alignment. The cable usually has no twist (key up to key up) to ensure proper channel to channel alignment. Electrical connection is achieved though a z-pluggable 38-pin IPASS? connector.

The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.

The TQPM01D is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.

 

NOW CONSUL TING

TEL: 0086-755-23316583
Fax: 0086-755-29810056
Email:sales@tibtronix.com

COPYRIGHT @ 2014

TECHNICAL SUPPORT: CTMON

Email:sales@tibtronix.com

Inquire Now